Custom Feather Convex Advertising Flag

Sizes and pricing

Pick Small (9 ft) or Medium (10.5 ft) at the same price for shop fronts, indoor events and booths. Large (14 ft) adds height for roadside use above car roofs, and X-Large (18 ft) is the statement size for large car parks, sports grounds and outdoor festivals.

The listed price covers the flag and pole set in your chosen size. Pick single or double-sided printing and the base that suits your surface when ordering.

How the Feather Convex Flag is printed

Every feather convex flag is printed with dye sublimation. Heat turns the ink into a gas that bonds inside the polyester fibres, so the color becomes part of the fabric instead of sitting on top of it. The result is a soft, flexible graphic with no cracking, peeling or stiff ink layer, and colors that hold up to sun, rain and repeated washing far better than surface-printed banners.

You can order it single-sided or double-sided. A single-sided print-through flag carries one graphic: the front is bright and the back shows the same design in reverse with softer color, which is the most budget-friendly way to brand a flag. A double-sided flag joins two separate prints with a light-blocking layer between them, so both faces read correctly and you can run a different message on each side — handy when traffic passes in both directions.

Choosing the right base

The base you need depends on the surface. A ground stake pushes into grass, sand or soil and is the simplest option for lawns, beaches and festival fields. A cross base folds flat and holds the pole upright on hard floors, pavements and car parks; add a water bag on top of it for extra weight outdoors. A square steel base is the heaviest choice for hard surfaces where you want the flag to stay put all day.

Every base uses a spinning spindle, so the flag turns with the wind instead of fighting it. That keeps your graphic facing the street and reduces strain on the poles.

Best uses for convex feather flags

Open houses and property listings, salon and spa entrances, restaurant patios, hotel and venue entrances, wedding and event venues, trade show booths and outdoor markets. Because the curved edge leaves a little more room at the top of the graphic, it is a good choice when your logo is round or square rather than long and narrow.

Convex or angled — which is right for you?

Both share the same sizes and prices. Choose angled if you want a bold, sporty look with a sharp corner. Choose convex if your brand feels softer or more premium, or if a round logo sits better under a curved top. Many customers order one of each to add variety along a frontage.

Artwork setup and your free design proof

Download the feather convex flag template from our design templates page and place your logo, message and background inside the safe area. Keep key text away from the pole sleeve and the outer edge, use large bold lettering that can be read from across a car park, and limit the message to a few words — flags are seen for seconds, not studied. Send a vector PDF or a high-resolution image in CMYK.

Not a designer? Send us your logo and a short brief and our team will lay it out for you. Every order includes a free digital proof, and nothing is printed until you approve it, so you can check spelling, colors and placement first.

Care, storage and getting the longest life

Take the feather convex flag down in very strong wind or storms, and let it dry fully before storage to avoid mildew. The fabric can be hand washed in cold water with mild detergent and air dried. Rotating two flags on long outdoor campaigns, or bringing them in overnight, greatly extends their life. Store the hardware in a carry bag so poles stay straight and connectors stay clean.

How to order your feather convex flag

Ordering takes a few minutes. First, choose the size that suits your venue using the size guide above. Second, add the feather convex flag to your cart and use the artwork notes box to tell us your print side, base choice, colors and any wording you want. Third, upload your artwork or send your logo to our team by email. We prepare a free digital proof showing exactly how the finished flag will look, and you can ask for changes until it is right.

Once you approve the proof, your flag goes into production. If you are ordering for a specific event date, mention it in your notes so our team can confirm timing before printing. Ordering several flags with the same design? Add the quantity you need and we will print every flag from the same approved file so colors match across the set.

Why order your feather convex flag from Branded Popup Tents

We are a family-owned business that has spent around 15 years printing event displays for small businesses, schools, sports clubs, charities and national brands. Our team prints flags alongside our custom canopy tents, table covers and trade show displays, so we understand how each piece looks together at an event — and we can match your colors across all of them.

Every feather convex flag is printed to order with your own artwork. Real people check every file, you approve a free proof before printing, and our sales team is available by phone at +1 832-323-7178 or by email if you need help choosing a size, shape or base.

Build a complete branded event display

Flags work best as part of a matching set. Pair them with a custom canopy tent so people can find your booth from a distance, add a printed table cover to brand the front of your table, and use a trade show display or backdrop behind you for photos and product demos. Ordering everything together keeps your colors consistent across every piece.